AG Bedding

Installation, Wash And Care Guide

How To Install Your AG Blanket

Step 1. Turn the mink cover inside out to expose the 6 hook ties.

Step 2. Lay the inner weighted blanket on a flat surface to expose the 6 hooks.

Step 3. Lay the inside out mink cover over the weighted blanket and line up the hooks and begin to tie a knot & connect both layers.

Step 4. When all hooks are tied together begin to flip the blanket outside-in. When flipped, zip the zipper up and Enjoy!

Wash & Care

Step 1. Open the zipper and remove the inner weight. Make sure to un-tie the hooks.

Step 2. Place the mink cover in the wash and use soft detergent. We recommend a cold wash and hang dry! Please avoid tumble dry.

To Clean Weighted Layer We recommend hand washing the inner layer to avoid any potential rips or tears to the weighted pockets. Hang to dry!